06-11-2008 08:03 AM - edited 03-15-2019 11:12 AM
Hello Everyone,
On my 7940 phone when I have a call on line 1 and a second call comes into my phone on line 2 I keep my soft key options "hold, transfer, etc" or my connected soft key template. However, I have a user who has a 7960 phone, when the user is on Line 1 and a second call comes into line 2 their connected soft key template goes away and she receives the ring in soft key template. My question is where do I change this feature so that the end users phone performs like mine, maintaining their original soft key template when a call comes in on the second line.
CM4.1.3sr5d
Solved! Go to Solution.
06-11-2008 08:33 AM
Hi Daniel,
It sounds like this setting is different :)
Try changing the System setting Auto-Line Select. With this Enabled the Display Focus (and Softkeys) always switch to the new incoming call. So if disabled the focus will stay on Call #1.
Also available on an individual phone via this setting;
Device>Phone>Phone Configuration>Product Specific Configuration>Auto Line Select>Disabled
Hope this helps!
Rob
06-11-2008 08:07 AM
Does that user with 7960 have a custom softkey template ?
06-11-2008 08:10 AM
Yes we both are. But we are using two different custom templates.
06-11-2008 08:33 AM
Hi Daniel,
It sounds like this setting is different :)
Try changing the System setting Auto-Line Select. With this Enabled the Display Focus (and Softkeys) always switch to the new incoming call. So if disabled the focus will stay on Call #1.
Also available on an individual phone via this setting;
Device>Phone>Phone Configuration>Product Specific Configuration>Auto Line Select>Disabled
Hope this helps!
Rob
06-11-2008 09:01 AM
Hi Rob,
You are awesome!
Danny
06-11-2008 09:29 AM
Hi Danny,
That is crazy talk ;-) Glad to be of some small help though.
Take care,
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: