CUCM upgrade from 6.1.1 to 6.1.2

Unanswered Question
Jun 12th, 2008

I am attempting an upgrade from 6.1.1 to 6.1.2.

I have not found any docs on the procedure, only release notes. Can anybody provide me with the doc or step by step procedure?

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Thu, 06/12/2008 - 07:59

Step 1 Install the new version of Unified CM on the publisher. Do not reboot.

Step 2 Install the new version of Unified CM on all subscribers simultaneously. Do not reboot.

Step 3 Reboot only the publisher. Switch to the new version of Unified CM and allow some time for the database to initialize.

Step 4 Reboot the TFTP server(s) one at a time. Switch to the new version of Unified CM and wait for the configuration files to be rebuilt before upgrading any further servers in the cluster.

Step 5 Reboot the dedicated music on hold (MoH) server(s) one at a time. Switch to the new version of Unified CM.

Step 6 Reboot the backup subscriber(s) one at a time. Switch to the new version of Unified CM. This step might impact some users if 50/50 load balancing is implemented.

Step 7 Fail-over the devices from the primary subscribers to their backups.

Step 8 Reboot the primary subscriber(s) one at a time. Switch to the new version of Unified CM.

HTH

javalenc

if this helps, please rate

Tommer Catlin Thu, 06/12/2008 - 08:00

The release notes I believe have how to upgrade it. If not, this is the same basic concept of how to upgrade.

http://cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch7.html

Log into the OS GUI

Click on Software upgrade/install

Select your source/file/login, etc

Click next

it will start the upgrade.

Do this on the PUBLISHER first, after the publisher is done, do the same on the Subscriber. ONe Subscriber at a t time. (thanks rob!)

hope this helps

t-alkhalidi Wed, 06/18/2008 - 13:12

hi

what do u mean by reboot, then switch version? i choosed switch version then it automatically reboot . or i need to do reboot after install then switch version? . could u explain pls. what about tftp do we need to restart the TFTp service on the servers?

Jaime Valencia Wed, 06/18/2008 - 13:30

what's the active version? if it's already 6.1(2) then that's it

HTH

javalenc

if this helps, please rate

Actions

This Discussion