michelcaissie Thu, 06/12/2008 - 05:48
User Badges:

First specify the server address and name of config file with the command;


tftp-server inside [tftp IP] /[filename]


Then when you want to backup the config just do a " wr net "

abhadana Thu, 06/12/2008 - 06:29
User Badges:



a) To save the configuration on the TFTP server:


firewall(config)# tftp-server


firewall(config)# write net


For example:


firewall(config)# tftp-server inside 192.168.1.5 config.txt

firewall(config)# write net


b) To copy back the configuration to the ASA:


Before copying the configuration on the new ASA, set the same IP addresses of the

interfaces of the original ASA and also set the same TFTP server on the new ASA.


firewall(config)# tftp-server


firewall(config)# config net :


For example:


firewall(config)# tftp-server inside 192.168.1.5 config.txt

firewall(config)# config net :


Note: There must be a space between the word net and the colon (:)


Actions

This Discussion