06-12-2008 05:42 AM - edited 03-11-2019 05:58 AM
up anyone know the cmd line to back up my pix to a tftp server...
06-12-2008 05:48 AM
First specify the server address and name of config file with the command;
tftp-server inside [tftp IP] /[filename]
Then when you want to backup the config just do a " wr net "
06-12-2008 06:29 AM
a) To save the configuration on the TFTP server:
firewall(config)# tftp-server
firewall(config)# write net
For example:
firewall(config)# tftp-server inside 192.168.1.5 config.txt
firewall(config)# write net
b) To copy back the configuration to the ASA:
Before copying the configuration on the new ASA, set the same IP addresses of the
interfaces of the original ASA and also set the same TFTP server on the new ASA.
firewall(config)# tftp-server
firewall(config)# config net :
For example:
firewall(config)# tftp-server inside 192.168.1.5 config.txt
firewall(config)# config net :
Note: There must be a space between the word net and the colon (:)
06-12-2008 06:30 AM
Consider the word ASA as pix here.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide