is it possible to do a SLB to two servers in a HP Closure (bladeswitch: Cisco 3020). The Cisco 3020 has an etherchannel with two ports connected to 6509 (which supports SLB).
Thanks in advance.
The servers do not actually be connected into the 6500 switch. You can either use
1) Dispatched mode where the real servers need to be L2 adjacent to the 6500.
2) Directed mode where the real servers do nto need to be L2 adjacent to the 6500.
Either one in your case would work as your servers are L2 adjacent to the 6500 switch.