06-12-2008 06:19 AM - edited 03-05-2019 11:35 PM
Hi,
I have one 3550 switch and i upgraded from 12.1 to 12.2(44)SE . But "tclsh" command is not enabled on this version. As per Cisco, 12.2(25)S is enough to enable TCL interpreter. Please let me know if you guys have answers.
06-16-2008 09:03 AM
Please post the show ver from this switch. I know tclsh is there in 12.2(44)SE advipservices.
05-17-2012 12:37 PM
I have a WS-C2960-24TT-L with the IOS c2960-lanbasek9-mz.122-44.SE6.bin which does not accept TCL either! Is it because of IOS version?
05-17-2012 12:48 PM
It's because of the platform. You need a Catalyst 3K series switch for many of the embedded automation features.
05-17-2012 12:57 PM
Interestingly I have a WS-C2960-24LC-S with c2960-lanlitek9-mz.122-50.SE4.bin which is running TCL!!! I don't get it...
05-17-2012 01:03 PM
Sorry, I forgot they enabled tclsh in 12.2(50) on the 2960s. Embedded Event Manager, on the other hand, is still not present on the 2K series.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide