Cisco TSP 6.1 and IP Phone 7941

biesselillo · ‎06-13-2008

Hello,

I have the CUCMA 6.1 and I have installed on a server the Cisco TSP.exe version 6.1 in order to have the status info of the extensions.

It works very good.

I also hve these IP Phones:

- 7941

- 7961

At this point I would like, using the TSP functions, to send a Lamp ON/OFF command to the ip phones.

I saw that it is possible, but is there a "lamp ID" ?

I'm asking you this because I'm using a Tapi interface which permits me to program under Vb.Net environment and this interface(is a dll) permits me to send this command to the ip phone:

TapiPhoneSetLamp(DevID,LampID,Flash)

at this point my question is, where can I find the Lamp ID ?

Can you help me plese?

Thank you very much in advance!

chris.fortner · ‎06-17-2008

16:05:41.625 CCM|StationD - stationOutputSetLamp stim: 9=Line

instance=1 lampMode=LampOn tcpHandle=0x4fbbc30

This is a trace of a lampOn request from callmanager to the IP phone. The tcpHandle is the IP address of the phone hashed! Hope this helps!