Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
992
Views
0
Helpful
5
Replies

C6000-MSFC2

Go to solution
hlearn
Level 1
Level 1

‎06-13-2008 09:07 AM

We have a C6MSFC2-PSV-M. In LMS 2.6, it displays as a C6000-MSFC2 as an attached device to some of our routers on our WAN. The WAN routers are connected as serial interfaces. Is there a way to get Topology Services Views to show it as a single device that the WAN routers are connected to instead of seperate devices that appear to be physically attached in the same icon?

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to hlearn

‎06-17-2008 07:18 AM

Upgrade to Campus Manager 4.0.11 and Common Services 3.0.6. Then reinitialize your ANI database. Finally, run a new Campus Data Collection. That should clear this problem up.

To reinitialize the ANI database, run the following command:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

View solution in original post

0 Helpful
5 Replies 5

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee

‎06-13-2008 10:28 AM

Please post a screenshot illustrating what you're seeing.

0 Helpful

Go to solution
hlearn
Level 1
Level 1
In response to Joe Clarke

‎06-13-2008 10:46 AM

The C6000 listing displays with some of the WAN sites as if they were part of that device. The C6000 should show as a central device that multiple WAN sites connect to like a central hub.

Preview file
582 KB
0 Helpful

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to hlearn

‎06-13-2008 11:50 AM

This could be some corruption in the Campus Manager data. What is the exact version of Campus Manager being used?

0 Helpful

Go to solution
hlearn
Level 1
Level 1
In response to Joe Clarke

‎06-17-2008 04:17 AM

Our Campus Manager is version 4.0.6

0 Helpful

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to hlearn

‎06-17-2008 07:18 AM

Upgrade to Campus Manager 4.0.11 and Common Services 3.0.6. Then reinitialize your ANI database. Finally, run a new Campus Data Collection. That should clear this problem up.

To reinitialize the ANI database, run the following command:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents