multicast video over wirelss problems!!!

Unanswered Question
Jun 15th, 2008
User Badges:

I have media service server transmit video using ip multicast I have Cisco routers 2800 and 3350 and I am enable PIM dense mode and multicast routing also enable , I am using Cisco switch 2950 and I enable IGMP snooping .

in such situation my video service is working well but .........the problem is when I transmit the service through wireless using Cisco AIRONET 1300 (average ping time 30ms ) my video service is distortion . please,is there any body may help me ?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bwilmoth Fri, 06/20/2008 - 08:10
User Badges:
  • Silver, 250 points or more

Basic (default)?Allows transmission at this rate for all packets, both unicast and multicast. At least one data rate must be set to Basic.The slowest basic rate is the rate that 802.11 management packets are sent. It is generally thought that management packets should be sent a the lowest rate. But, these are application devices and should be set to best

fit the application(s).



http://www.cisco.com/en/US/docs/wireless/access_point/350/configuration/guide/ap350ch3_ps458_TSD_Products_Configuration_Guide_Chapter

Actions

This Discussion