How to use Offset-List in RIP for Back-up Route?

Unanswered Question
Jun 15th, 2008

Assalam o Alaikum,

I have a network with redundant links. I want to have one as Primary and the other one as Backup. the configuration is attached with the diagram of network.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
royalblues Sun, 06/15/2008 - 23:52

You need to create an access-list identifying the networks and then offset the metric out of that interface


for eg.

If you want 10.0.0.0/23 to be used as bakup over the VSAT connection, you need to d0 someting like this


access-list 10 permit 10.0.0.0 0.0.1.255


router rip

version 2

offset-list 10 out fastethernet 0/8


http://www.cisco.com/en/US/docs/ios/12_3/iproute/command/reference/ip2_o1g.html#wp1036466


HTH

Narayan

royalblues Mon, 06/16/2008 - 02:23

If you choose out, then it should be on the branch switch


If you prefere using IN, then you need to use it on the router interface connecting to the switch


Narayan

Actions

This Discussion