06-16-2008 04:09 AM
Hi Experts.
I cannot get SSL VPN tunnel mode to work on a Cisco1801 Router. I can get the URL side working fine, but when i try and set-up the Tunnel mode using SDM. I get the following error message when i try to connect.
An error has been found in the VPN server certificate.
Certificate received is signed by an untrusted authority.
I then have the option to install the certificate. This process seems to work but i then get the following error.
The SSL VPN HTTP responce code received form the gateway indicates an error, contact your network administartor.
Am i doing something wrong with regards to the certificate?
Solved! Go to Solution.
06-16-2008 09:07 AM
I'm sorry, just got a chance to skim through your configs. It seems you are using a VPN pool which is not directly connected to the router. You either need to use a directly connected pool or create a loopback in the same subnet.
Also post output of
debug webvpn tunnel
debug webvpn auth
debug webvpn svc
Regards
Farrukh
06-16-2008 04:12 AM
06-16-2008 09:07 AM
I'm sorry, just got a chance to skim through your configs. It seems you are using a VPN pool which is not directly connected to the router. You either need to use a directly connected pool or create a loopback in the same subnet.
Also post output of
debug webvpn tunnel
debug webvpn auth
debug webvpn svc
Regards
Farrukh
06-17-2008 02:38 AM
The Pool was the problem, thanks a lot for you help all working now...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide