LMS config fetch

Answered Question
Jun 16th, 2008

Hi,

we have installed a LMS 3.0.1. We have scheduled the pollings and the collections but we want to tune our LMS a bit more.

We want that LMS fetches the configs automatically just after making changes in those configs.

How could it be done? I've thought via syslog but I don't know exactly how to do it.

Regards.

I have this problem too.
0 votes
Correct Answer by Martin Ermel about 8 years 5 months ago

this is working out-of-the-box. You need to disable this function if you do not want it! It is setup in RME as an automatic-action (AA) for certain syslog messages. Control the settings here:

RME > Tool > Syslog > Automatic Actions

2 records should be there: 'Inventory Fetch' and 'Config Fetch' where the later is just doing what you want - if its status is set to 'Enabled'

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (2 ratings)
Loading.
Correct Answer
Martin Ermel Mon, 06/16/2008 - 08:47

this is working out-of-the-box. You need to disable this function if you do not want it! It is setup in RME as an automatic-action (AA) for certain syslog messages. Control the settings here:

RME > Tool > Syslog > Automatic Actions

2 records should be there: 'Inventory Fetch' and 'Config Fetch' where the later is just doing what you want - if its status is set to 'Enabled'

Actions

This Discussion