Integration CUCM6.0 with Unity Connection 2.0 issue

Unanswered Question
Jun 16th, 2008
User Badges:

Hi everybody, we have a problem with the voice mail ports configuration in the integration of CUCM6.0 with Unity Connection 2.0 , it means when an internal number leaves a message to another, this can not access your mailbox, when the pilot call number just rings, which can be missing? , We have 16 ports, 10 ports configured as answering ports and 5 ports as dial-out ports, 1 port for IVR.No have set up authentication or any encryption, is licensed for 100 users with voice mail, and we have registered 98.


I'll appreciate very much your help.









  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Mon, 06/16/2008 - 16:58
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Omar,


Have a close look at the new Partitions/CSS that need to be created for the VM Pilot and VM Ports;


Setting Up a Cisco Unified Communications Manager 6.x SCCP Integration with Cisco Unity Connection


http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucm_sccp/guide/cucintcucmskinny070.html


Hope this helps!

Rob

Actions

This Discussion