Callmanager 5 Option Under IP phones network settings??

Ayodeji Okanlawon · ‎06-17-2008

Hi,

I have noticed that under the newtork seetings for IP phones there are 5 possible callmanager options.

ccm 1..3 can be filled up by 3 subscribers in the ccm group to which the IP phone belogs to. CCM 4 can be filled by SRST refrence.

What then is the callmanager 5 option for? Is this for future use?

Please rate all useful posts

thisisshanky · ‎06-17-2008

This should not be in use currently. Only upto 3 in a list.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Jaime Valencia · ‎06-17-2008

you should be able to configure 2 srst references:

The system administrator can configure the SRST configuration for a device pool of phones. The following list gives configuration options that are available:

â€¢Disable-If a phone cannot reach any Cisco CallManagers, it does not try to connect to an SRST gateway.

â€¢Use Default Gateway-If a phone cannot reach any Cisco CallManagers, it tries to connect to its IP gateway as an SRST gateway.

â€¢User-defined-If a phone cannot reach any Cisco CallManagers, it tries to connect to an administrator-specified SRST gateway. The SRST Reference field of the Device Pool Configuration lists user-defined SRST references.

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate