I currently user 12.3.26 Enterprise and ip sla is not there. I looked in feature navigator and only version I found was 12.2-31.sb10. I am not sure that it will support NPE-G1

Mike

According to Feature Navigator 12.3(26) Enterprise does support IP SLA or at least these

IP SLAs - Application Performance Monitor (APM)

IP SLAs - DHCP Operation

IP SLAs - Distribution of Statistics

IP SLAs - DLSW+ Operation

IP SLAs - DNS Operation

IP SLAs - Frame Relay Interfaces

IP SLAs - Frame Relay Operation

IP SLAs - FTP Operation

IP SLAs - History Statistics

IP SLAs - HTTP Operation

IP SLAs - ICMP Path Echo Operation

IP SLAs - MPLS VPN Awareness

IP SLAs - One Way Measurement

IP SLAs - Path Jitter Operation

IP SLAs - Reaction Threshold

IP SLAs - Scheduler

IP SLAs - SNA LU2 Echo

IP SLAs - SNMP Support

IP SLAs - TCP Connect Operation

IP SLAs - UDP Echo Operation

IP SLAs - UDP Jitter Operation

Is there something else you need.

Jon

Yeah thats what feature navigator says.

This is what my router is running:

System image file is "disk2:c7200-js-mz.123-26.bin"

IP SLA is not there

Mike

Sorry, don't have a 7200 to test on.

One quick check, apologies if you have already done this.

7200(config)# ip sla monitor 1

or

7200(config)# rtr 1

Jon

I did try ip sla monitor 1 not there

rtr 1 is there. Looks like syntax is different.

Mike

Have a look at this link. Your IOS is using rtr syntax to configure IP SLA.

http://www.cisco.com/en/US/technologies/tk648/tk362/technologies_white_paper0900aecd8022c2cc.html

Jon

I am looking there now