UCM 6.1 Xcode/Conf Resources

Unanswered Question
Jun 17th, 2008

cannot get hardware conference/transcode resources to register. sccp shows up, cause code is tcp_conn_error. Used same process I use in CM4.2 DSP's are up.

no sccp/sccp doesnt help. Selecting IOS Enhanced in UC6.1 Thoughts are welcome

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
balitewiczp Tue, 06/17/2008 - 13:38

CNHKGNRT301#sho sccp

SCCP Admin State: UP

Gateway IP Address: 172.21.125.130, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.5.139.197, Port Number: 2000

Priority: 2, Version: 5.0.1, Identifier: 2

Call Manager: 10.5.135.196, Port Number: 2000

Priority: 1, Version: 5.0.1, Identifier: 1

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Profile Identifier: 2

Reported Max Streams: 8, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Profile Identifier: 1

Reported Max Streams: 32, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

CNHKGNRT301#sho sccp ccm gr 1

CCM Group Identifier: 1

Description: None

Binded Interface: Loopback99, IP Address: 172.21.125.130

Associated CCM Id: 1, Priority in this CCM Group: 1

Associated CCM Id: 2, Priority in this CCM Group: 2

Associated Profile: 2, Registration Name: APHKXCODE

Associated Profile: 1, Registration Name: APHKCFB

Registration Retries: 3, Registration Timeout: 10 sec

Keepalive Retries: 3, Keepalive Timeout: 30 sec

CCM Connect Retries: 3, CCM Connect Interval: 10 sec

Switchover Method: GRACEFUL, Switchback Method: GRACEFUL_GUARD

Switchback Interval: 10 sec, Switchback Timeout: 7200 sec

Signaling DSCP value: cs3, Audio DSCP value: ef

sccp local Loopback99

sccp ccm 10.5.139.197 identifier 2 priority 2 version 5.0.1

sccp ccm 10.5.135.196 identifier 1 priority 1 version 5.0.1

sccp

!

sccp ccm group 1

bind interface Loopback99

associate ccm 1 priority 1

associate ccm 2 priority 2

associate profile 2 register APHKXCODE

associate profile 1 register APHKCFB

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729br8

codec g729r8

maximum sessions 4

associate application SCCP

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 4

associate application SCCP

chris.fortner Tue, 06/17/2008 - 13:44

What are the names of the resouces in your callmanager? Are they APHKXCODE and APHKCFB?

chris.fortner Tue, 06/17/2008 - 13:45

You would think to CCIE Voice guys would have something better to do!!!

Also - Use standard IOS and not enhanced!

balitewiczp Wed, 06/18/2008 - 05:54

Yep, names match exactly. Tried Standard, same problem. Is "no sccp / sccp" the correct way to reset from cli? Maybe its an IOS problem. version is 12.4(9)T7

Actions

This Discussion