running config could notbe copied to startup config of your router

Unanswered Question
Jun 17th, 2008
User Badges:

Hi, I have a Cisco 857W and I'm using the SDM to configure but whenever I try and save my changes to the router I get the error message that 'running config could notbe copied to startup config of your router'


ANy suggestions


thanks

David

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
hadbou Tue, 06/24/2008 - 13:45
User Badges:
  • Bronze, 100 points or more

Perform the following commands and then check for the issue.

Under Config Mode:

Router(config)#Ip http server

Router(config)#Ip http secure-server

Router(config)#Ip http authentication local


Under Line vty 0 4:

Router(config-line)#login local

Router(config-line)#transport input telnet ssh.


After configuring Re-launch SDM with http/https authentication and try

clicking the "save" button by making some changes using SDM.

Also check for device memory available.

Actions

This Discussion