06-18-2008 07:16 AM - edited 07-03-2021 04:02 PM
Hi!
I got a problem with a LWAPP 1231 and 4402 WLC. The convertion procedure goes fine, but when the AP tries to join to controller i find some errors on the AP and does not register on the WLC.
Errors on the AP:
*Mar 1 00:00:23.718: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
Mar 1 00:00:34.383: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
Mar 1 00:00:40.395: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not rec
ieve the Join response
*Mar 1 00:00:40.395: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
Mar 1 00:00:40.447: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.
*Mar 1 00:00:40.447: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file s
ystem is available.
WLC version: AIR-WLC4400-K9-4-2-112-0.aes
AP version: c1200-rcvk9w8-tar.123-11JX1.tar
Hope it helps.
Thank you very much
06-18-2008 03:06 PM
Check out these other threads:
06-19-2008 05:48 AM
The AP 1231 is an older one, and probably has a Self-Signed Certificate (SSC). Newer APs have MIC, or Manufacture Installed Certificate. You need to enable SSC on the controller and add the certificate hash to the controller to allow it to join. The certificate hash should have been given to you as an output file from the upgrade process. Also, be sure your controller's time is current - I recommend an NTP server.
Regards,
Scott
06-24-2008 01:09 AM
Hi guys!
Thanks for your posts.
I'll try it ASAP.
We'll keep in touch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide