Here is what I found on a previous thread:
First, check the flash:
lap_1242_1#dir
Directory of flash:/
2 -rwx 279 May 09 2008 11:52:20 +00:00 env_vars
4 -rwx 6168 May 09 2008 11:52:20 +00:00 private-multiple-fs
6 drwx 256 May 09 2008 11:49:05 +00:00 c1240-k9w8-mx.124-3g.JA2
5 drwx 128 Mar 01 2002 00:03:43 +00:00 c1240-rcvk9w8-mx
15998976 bytes total (10716672 bytes free)
Then delete the LWAPP image:
lap_1242_1#delete /r /f flash:/c1240-k9w8-mx.124-3g.JA2
Thirdly reload the AP:
lap_1242_1#reload
You'll end up with a clear AP.
When the ap comes back, then do a clear lwapp private-config.
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless - Mobility&topic=General&topicID=.ee6e8b8&fromOutline=&CommCmd=MB?cmd=display_location&location=.2cbf883c
-Scott
*** Please rate helpful posts ***