Static entry on ASA

Answered Question
Jun 18th, 2008
User Badges:

Hello's,


I have a ASA running 7.2.


I'm trying to issue this command:


static (inside,outside) tcp 4.1.14.10 3389 192.168.0.5 3389 netmask 255.255.255.255 0 0


And keep getting this:


ERROR: Static PAT using the interface requires the use of the 'interface' keyword instead of the interface IP address




This is my first time messing with an ASA and I'm just trying to forward any traffic on port 3389 (RDP) to 192.168.0.5.


Help?


Thanks

Correct Answer by Jon Marshall about 8 years 9 months ago

If 4.1.14.10 is the IP address assigned to the ASA outside interface change your static statement to


static (inside,outside) tcp interface 3389 192.168.0.5 3389 netmask 255.255.255.255


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Wed, 06/18/2008 - 15:11
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

If 4.1.14.10 is the IP address assigned to the ASA outside interface change your static statement to


static (inside,outside) tcp interface 3389 192.168.0.5 3389 netmask 255.255.255.255


Jon

Armegeden Wed, 06/18/2008 - 15:22
User Badges:

Gah!


Reading the error message, I tried "outside" instead of the word "interface". Syntax error.


Anyhow, did what you said + added ACL entry and everything working great.


Thanks so much for the fast response!



Actions

This Discussion