Dear Sir,
I cannot make the PIS-SSL service active as shown in the captured text below.
And do you know why do not the "slot" command work? It said...
L1150101_WC(config-service[PIS-SSL])# slot 2
%% Module does not exist in slot.
any idea? Thanks a lot.
=================================
L1150101_WC# sh run ssl-proxy-list PIS-SSL-LIST
!*********************** SSL PROXY LIST ***********************
ssl-proxy-list PIS-SSL-LIST
backend-server 1
backend-server 1 tcp virtual ack-delay 0
backend-server 1 server-ip 10.106.13.20
backend-server 1 ip address 10.106.13.225
active
L1150101_WC# sh run service PIS-SSL
!************************** SERVICE **************************
service PIS-SSL
type ssl-accel-backend
add ssl-proxy-list PIS-SSL-LIST
ip address 10.106.13.225
L1150101_WC# sh run owner PIS_PISWEBP0102
!*************************** OWNER ***************************
owner PIS_PISWEBP0102
content PIS-DNS-VIP-1
vip address 10.106.13.224
port 53
protocol tcp
redundant-index 35
add service PISWEBP01
add service PISWEBP02
active
content PIS-HTTP-VIP-1
vip address 10.106.13.224
port 80
protocol tcp
redundant-index 33
add service PISWEBP01
add service PISWEBP02
active
content PIS-SMTP-VIP-1
vip address 10.106.13.224
port 25
protocol tcp
redundant-index 34
add service PISWEBP01
add service PISWEBP02
active
content PIS-SSL-VIP-1
vip address 10.106.13.224
advanced-balance arrowpoint-cookie
protocol tcp
port 443
url "/*"
add service PIS-SSL
active
L1150101_WC# config t
L1150101_WC(config)# service PIS-SSL
L1150101_WC(config-service[PIS-SSL])# active
%% Error sending config to fortune, service not activated
L1150101_WC(config-service[PIS-SSL])#