06-19-2008 12:00 AM - edited 03-15-2019 11:22 AM
when i run debug mgcp error - here is messages that drops
*Jun 19 07:50:26.236: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:34.432: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:36.796: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:38.784: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:39.408: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:45.184: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:46.148: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:59.884: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:51:00.308: mgcp_get_cac_params, Error Selecting codec
what is the problem ?
some-times GW balancing and registers to Subscriber and then goes Publisher.
06-19-2008 12:01 AM
help!
06-19-2008 01:38 AM
no answer?
06-19-2008 02:07 AM
Would you please post your router config...at least the mgcp part of it. ALso if it is possible:
sh ccm
debug mgcp events
are you using PRI backhaul? post sh e1 contr.
06-19-2008 03:01 AM
sh ccm
MGCP Domain Name: XXXXXX
Priority Status Host
============================================================
Primary Backup Ready XXXXXX
First Backup Registered XXXXXX
Second Backup None
Current active Call Manager: XXXXX
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 10:48:50 UTC Jun 19 2008 (elapsed time: 00:01:28 )
Last MGCP traffic time: 10:50:01 UTC Jun 19 2008 (elapsed time: 00:00:17 )
Last failover time: 08:43:01 UTC Jun 19 2008 from (XXXXXXXX)
Last switchback time: 07:40:46 UTC Jun 19 2008 from (xxxxxxxx)
Switchback mode: Graceful
MGCP Fallback mode: Enabled/OFF
Last MGCP Fallback start time: 17:40:32 UTC Jun 14 2008
Last MGCP Fallback end time: 17:40:52 UTC Jun 14 2008
MGCP Download Tones: Disabled
Backhaul Link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address: XXXXXXX
Current Link State: OPEN
Statistics:
Packets recvd: 3707
Recv failures: 0
Packets xmitted: 3771
Xmit failures: 0
PRI Ports being backhauled:
Slot 0, port 0
Slot 0, port 0
Configuration Auto-Download Information
=======================================
Current version-id: {XXXXXXXXXXXXXXXXXX}
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
Download Attempted : 80
Download Successful : 80
Download Failed : 0
Configuration Attempted : 6
Configuration Successful : 6
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
Last config download command: New Registration
Configuration Error History:
FAX mode: cisco
06-19-2008 03:19 AM
Seems fine to me, please post your Router config, CCM version and debug mgcp events.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide