06-19-2008 12:00 AM - edited 03-15-2019 11:22 AM
when i run debug mgcp error - here is messages that drops
*Jun 19 07:50:26.236: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:34.432: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:36.796: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:38.784: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:39.408: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:45.184: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:46.148: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:50:59.884: mgcp_get_cac_params, Error Selecting codec
*Jun 19 07:51:00.308: mgcp_get_cac_params, Error Selecting codec
what is the problem ?
some-times GW balancing and registers to Subscriber and then goes Publisher.
06-19-2008 12:01 AM
help!
06-19-2008 01:38 AM
no answer?
06-19-2008 02:07 AM
Would you please post your router config...at least the mgcp part of it. ALso if it is possible:
sh ccm
debug mgcp events
are you using PRI backhaul? post sh e1 contr.
06-19-2008 03:01 AM
sh ccm
MGCP Domain Name: XXXXXX
Priority Status Host
============================================================
Primary Backup Ready XXXXXX
First Backup Registered XXXXXX
Second Backup None
Current active Call Manager: XXXXX
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 10:48:50 UTC Jun 19 2008 (elapsed time: 00:01:28 )
Last MGCP traffic time: 10:50:01 UTC Jun 19 2008 (elapsed time: 00:00:17 )
Last failover time: 08:43:01 UTC Jun 19 2008 from (XXXXXXXX)
Last switchback time: 07:40:46 UTC Jun 19 2008 from (xxxxxxxx)
Switchback mode: Graceful
MGCP Fallback mode: Enabled/OFF
Last MGCP Fallback start time: 17:40:32 UTC Jun 14 2008
Last MGCP Fallback end time: 17:40:52 UTC Jun 14 2008
MGCP Download Tones: Disabled
Backhaul Link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address: XXXXXXX
Current Link State: OPEN
Statistics:
Packets recvd: 3707
Recv failures: 0
Packets xmitted: 3771
Xmit failures: 0
PRI Ports being backhauled:
Slot 0, port 0
Slot 0, port 0
Configuration Auto-Download Information
=======================================
Current version-id: {XXXXXXXXXXXXXXXXXX}
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
Download Attempted : 80
Download Successful : 80
Download Failed : 0
Configuration Attempted : 6
Configuration Successful : 6
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
Last config download command: New Registration
Configuration Error History:
FAX mode: cisco
06-19-2008 03:19 AM
Seems fine to me, please post your Router config, CCM version and debug mgcp events.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: