06-19-2008 02:26 AM - edited 03-15-2019 11:23 AM
I am running CUE on 2811 router and have a Polycom analogue conferencing station connected to an FXS port. I have dial tone. Problem is that I need to configure the port to enable multiple lines so other callers can be added to the conference call. At present I cannot join a second call from the Polycom unit as no line is available.
Any suggestions welcome.
06-19-2008 05:33 AM
Hi Andrew,
Conferencing is supported (3 party) on FXS Ports running in SCCP mode only using Hookflash.
Dial/connect first call> Hookflash> Dial/connect 3rd Party> Hookflash all 3 parties are added together.
Here is the related info;
SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways
http://cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1178205
Hope this helps!
Rob
06-19-2008 05:53 AM
Hi Rob
Thanks for the information!
Andrew
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide