06-19-2008 02:26 AM - edited 03-15-2019 11:23 AM
I am running CUE on 2811 router and have a Polycom analogue conferencing station connected to an FXS port. I have dial tone. Problem is that I need to configure the port to enable multiple lines so other callers can be added to the conference call. At present I cannot join a second call from the Polycom unit as no line is available.
Any suggestions welcome.
06-19-2008 05:33 AM
Hi Andrew,
Conferencing is supported (3 party) on FXS Ports running in SCCP mode only using Hookflash.
Dial/connect first call> Hookflash> Dial/connect 3rd Party> Hookflash all 3 parties are added together.
Here is the related info;
SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways
http://cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1178205
Hope this helps!
Rob
06-19-2008 05:53 AM
Hi Rob
Thanks for the information!
Andrew
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: