CallManager Trunck

habouzyad · ‎06-19-2008

Hello,

i have 3 Sites :

Site A [ CallManager Cluster A]

Site B [ CallManager Cluster B]

Site C [ CallManager Cluster C]

the connection betwen A and B already exist by trunk [ CCM-A & CCM-B].

Now i want to configuer a trunk betwen CCM-B and CCM-C, i want olny the iphones in site C call the iphones in the site B

how can configure that .?

thanks in advance

Hicham

Zin.Karzazi · ‎06-19-2008

First you need to set up a route pattern to your remote site. Let s say your DNs on site C are 7xxx and your remote site B is using 6xxx.

set up a route pattern 6xxx and select the trunk Route List in it.

1- Include the Partition of your Route pattern (6xxx) in the CSS of your phones.

2- Ensure that the route list on your RP is correct (ie Trunk Route List)

3- on your remote trunk-> Inbound call -> CSS

check if this css include the Partition of your phones.

You do this just for the C Site, the phones on the B Site will not be able to Call to C Site.

HTH

Zin Elabidine Karzazi