06-19-2008 09:50 AM - edited 03-05-2019 11:44 PM
One of my switches is complaining about a VLAN mismatch on two of it's ports.
I know what is causing it but want to make sure it won't be a problem.
One of the ports is in our DMZ VLAN.
We recently bought a Barracuda Web Application Firewall device. This device runs in bridged mode and our web server is supposed to sit behind it.
I created another VLAN (DMZ2) and moved the webserver into this VLAN. The Barracuda is plugged into both VLAN's and bridges the traffic. The two ports that are complaining are the two this Barracuda are plugged into.
Hopefully this makes sense. Can I safely ignore the Warning the switch is generating? The traffic seems to be flowing just fine.
Thanks,
Denny
Solved! Go to Solution.
06-19-2008 10:09 AM
if you disable cdp on those ports you'll stop getting those messages. native vlan information is contained within cdp frames and that's probably the cause of the messages.
http://www.cisco.com/en/US/docs/ios/12_1/configfun/configuration/guide/fcd301c.html
06-19-2008 10:09 AM
if you disable cdp on those ports you'll stop getting those messages. native vlan information is contained within cdp frames and that's probably the cause of the messages.
http://www.cisco.com/en/US/docs/ios/12_1/configfun/configuration/guide/fcd301c.html
06-19-2008 10:11 AM
Thank you so much for the response. I kinda figured there was a way to prevent it.
Thank you again,
Denny
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: