Kevin Dorrell Fri, 06/20/2008 - 01:38
User Badges:
  • Green, 3000 points or more

I'm afraid I don't really understand what you mean by "One device is connected via L2", and "able to ping this device from L2 but not able to ping from L3".


Could you give some concrete example please? What are the addresses, and what addresses can you ping, and what are the addresses on the switch? Also, what model of switch are we talking about: a layer-2 switch like the 2960, or a layer-3 switch like 3560 with IP routing enabled?


Kevin Dorrell

Luxembourg


tarunavakonar Fri, 06/20/2008 - 01:55
User Badges:

l3-cisco4506 vlan7- ip 10.207.4.3

l2 switch cisco2950 ip 10.205.81.22

both are connected in trunk

device ip 10.207.4.1

which is connected to l2 through accessport vl7

i am not able to ping 10.207.4.1 from l3

but i can ping from l2

Actions

This Discussion