AP 1242

mansoor9349 · ‎06-20-2008

I have 1242 AP whose IP address is configured as static. I need my clients to associate with the AP, and get IP address assigned by AP. But I didn't find any option where I can put the range for the DHCP. Kindly guide me

Cheers

Scott Fella · ‎06-20-2008

Configure this:

ip dhcp pool

network x.x.x.x 255.255.255.0

default-router x.x.x.x

ip dhcp excluded-address

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1000999

-Scott
*** Please rate helpful posts ***

mansoor9349 · ‎06-20-2008

It seems that I need to configure the DHCP pool for my clinets on CLI mode. Is there any way to use the GUI mode in order to configure the same on 1242

Cheers

Scott Fella · ‎06-21-2008

I'm 99% sure you have to configure DHCP Scope via the CLI. I have never found that option in the GUI.

-Scott
*** Please rate helpful posts ***