06-20-2008 11:47 AM - edited 03-18-2019 09:09 PM
where will i find a guide that helps me configure a cisco call manger 6.x with a cisco CME 2801 router ???
06-21-2008 04:06 PM
exactly what are you trying to configure?
your post does not provide enough information to help you
javalenc
06-23-2008 05:28 AM
i hav a 2801 router which has some ip phones connected to it, and i hav a call manager 6.x i want to interconnect these two in such a way that the call manager becomes a publisher nd the 2801 is the subscriber that is the 2801 will send the call records to the call manager...
06-23-2008 06:31 PM
ok, you can have the phones with either CUCM or CME, but not with both. in any case what you would need to use is CUCM + SRST
the terms PUB and SUB are only used in CUCM environments, not with CME.
there's plenty of material within CCO
and here:
http://www.cisco.com/univercd/home/home.htm
since you're new you will need to start reading a lot if you really want to learn
HTH
javalenc
if this helps, please rate
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: