How to CallForwardAll from an alalog device in CallManager

Unanswered Question
Jun 20th, 2008
User Badges:

We are running CCM 4.1.3. We have a couple of analog phones, one connected to an fxs port and the other to an ATA 186. Is there a way through a button sequence to do a CallForwardAll on the analog device?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Fri, 06/20/2008 - 16:11
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Rafael,


For the ATA running SCCP and FXS running SCCP (Supplementary services) Call Forward All is **1 then the number Call Forward All Cancel is **2;


Activate Call-Forward-All


Use this feature to send all calls from one telephone number to another telephone number. To activate Call-Forward-All, follow these steps:


Procedure



--------------------------------------------------------------------------------


Step 1 Press ** then 1 on your telephone keypad. You will receive a confirmation tone.


Step 2 Enter the telephone number to which you want to send the calls. A confirmation tone will sound.


Step 3 Hang up.


From this good SCCP doc;


http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/user.html#wp1014659


For FXS;


http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html


Hope this helps!

Rob

Actions

This Discussion