06-22-2008 05:26 PM - edited 02-21-2020 02:53 AM
Same old story, but I've been unable to resolve. Client that we've recently taken over with 501 to 506 VPN but can't access LAN resources from one side to the other. (Ping, browse, telnet...). Both configs attached. Thanks in advance.
Solved! Go to Solution.
06-25-2008 05:52 AM
You have encr/decr on both sides, are you sure BOTH sides cannot access each other?
Regards
Farrukh
07-01-2008 12:12 AM
Great to know you have it working now :)
Please rate helpful posts.
Regards
Farrukh
06-22-2008 10:57 PM
Can you post the following from both sides after establishing the tunnel and doing a continuous ping:
show crypto isakmp sa
show crypto ipsec sa
Also have a look at:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a008009448c.shtml
Regards
Farrukh
06-24-2008 06:19 AM
06-25-2008 05:52 AM
You have encr/decr on both sides, are you sure BOTH sides cannot access each other?
Regards
Farrukh
06-30-2008 02:51 PM
Thanks, happs links took care of it. It's always an ACL!! Thanks again guys.
07-01-2008 12:12 AM
Great to know you have it working now :)
Please rate helpful posts.
Regards
Farrukh
06-30-2008 09:04 AM
Doesnt look like a vpn problem anymore, just make sure the hosts in question do not have a Firewall installed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide