Cant place call for IP Phone from Outside

Answered Question
Jun 23rd, 2008
User Badges:

Hi, I have a Call Manager 6.0.1 and configured at the beginning 3 IP phones. They are registered and have the real phone numbers. Calls to outside und within the network are fine, but calls from outside are rejected (number unknown). I see on the gateway that the numbers will transfered to the Call Manager but call is not established.

Thanks in advance.


Erich

Correct Answer by ncrgcp about 9 years 1 month ago

Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Correct Answer
ncrgcp Mon, 06/23/2008 - 09:42
User Badges:

Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".

ezy Mon, 06/23/2008 - 10:30
User Badges:

Hi, thanks for advice and help, the problem was a translation pattern wich was misconfigured from a CME configuration before.

Thanks again

Erich


Actions

This Discussion