Solved: Cant place call for IP Phone from Outside

ezy · ‎06-23-2008

Hi, I have a Call Manager 6.0.1 and configured at the beginning 3 IP phones. They are registered and have the real phone numbers. Calls to outside und within the network are fine, but calls from outside are rejected (number unknown). I see on the gateway that the numbers will transfered to the Call Manager but call is not established.

Thanks in advance.

Erich

ncrgcp · ‎06-23-2008

Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".

View solution in original post

ncrgcp · ‎06-23-2008

Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".

ezy · ‎06-23-2008

Hi, thanks for advice and help, the problem was a translation pattern wich was misconfigured from a CME configuration before.

Thanks again

Erich