Brazil R2-digital configuration

Unanswered Question
Jun 23rd, 2008
User Badges:

Hi need to implement CUCM with PSTN gateway to Brasil Telecom in Parana Brazil.

Has anyone done a ideal configuration to their R2?

Can some one send the config??

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Tue, 06/24/2008 - 00:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, if you search the forum with the form on the right, you can find few threads about E1 R2 in Brazil.

dsobrinho Mon, 01/31/2011 - 10:52
User Badges:
  • Red, 2250 points or more

Hey man,

Following the configuration for Brazil.

controller E1 0/0/0
framing NO-CRC4
ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
cas-custom 0
  country brazil use-defaults
  category 2
  answer-signal group-b 1


voice-port 0/0/0:0
timeouts interdigit 0
timeouts call-disconnect 0

I know that you have been done this many times, but following the correct configuration.

best regards my friend.


This Discussion