Re : Natting Q .....

Unanswered Question
Jun 23rd, 2008
User Badges:

Hi,

I would like to confirm if the config for the natting below works or not :-

!

ip dhcp pool POOL

network 192.168.0.0 255.255.255.0

dns-server 203.121.65.39 203.121.65.30

default-router 192.168.0.200

lease 7

!

!

int e0/0

ip address 192.168.0.200 255.255.255.0

ip nat inside

!

!

int e0/1

ip address 192.168.1.200 255.255.255.0

ip nat inside

!

!

interface Serial0/0

ip address 200.x.x.x 255.255.255.252

ip nat outside

!

!

ip nat inside source list 10 interface s0/0 overload

!

!

access-list 10 permit 192.168.0.200 0.0.0.255

access-list 10 permit 192.168.1.200 0.0.0.255


Thank you,


Cheers,

- sn -

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
hennigan Mon, 06/23/2008 - 22:56
User Badges:
  • Bronze, 100 points or more

Yes, it should work.


You'll want a default static route to the ip address on the other side of the serial link.

Actions

This Discussion