dear, thank you for help i did max-conn command before but i thought there is command for hunt group... no problem... now i have this issue:
i did at my AS5400:
VoiceGateway#sh voice call status
CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers
0xAF30 28D7 0x5543013C 7/0.6 1/13:0 *65523601 g711ulaw 287/1
0xB050 2A56 0x5543013C 7/0.7 5/9:4 *65855918 g711ulaw 0/1
0xB079 2AA0 0x5543013C 7/0.3 1/2:1 *65331605 g729r8 0/1
0xB0B6 2B04 0x5543013C 7/0.2 5/3:2 *65671445 g729r8 0/1
0xB0C7 2B21 0x5543013C 7/0.8 3/15:3 *65681018 g723r63 0/1
0xB0E9 2B54 0x5543013C 7/0.5 1/16:1 *777751690 g711ulaw 200/2
0xB0EF 2B64 0x5543013C 7/0.4 1/12:1 *7142823464 g711ulaw 200/1
Q1. what * means?
Q2.why just AS5400 shows 10 digits maximum?
Q3.how i can see all digits that i dialed?
Q4. for international calls 00xxxxxxxx i did not do Dial Peers or translation rules but the calls succeed and i can do international calls from AS5400 how this happens.just i have these commands:
translation-rule 1
Rule 1 ^1515#9627 7
Rule 2 ^4020#9622 2
Rule 3 ^4020#9623 3
Rule 5 ^05 5
Rule 6 ^06 6
Rule 7 ^07 7
Rule 8 ^02 2
dial-peer voice 1 pots
destination-pattern .T
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing called 1
port 7/0:D
any help please?
BR.
