Aironet Authentication Question

Unanswered Question
Jun 24th, 2008
User Badges:

I have an Aironet 1130AG Series Access Point and would like to do the following:

When users connect to the access point, a Web page opens asking for a user name and security code. Users can only access the Internet after correctly authenticating.

Can this be done with the Aironet 1130AG?

Thanks for any help.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Scott Fella Tue, 06/24/2008 - 09:49
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

If you have an autonomous 1130AG, you will need to implement a portal of some sort like ZoneCD. If you have a WLC and the 1130AG is Lightweight, then you can use the guest access webauth page. Hope this helps.

rseals Tue, 06/24/2008 - 14:13
User Badges:

When we had an autonomous network we used m0n0wall as a guest portal. It worked very well and was opensource.

Georgios Nikitas Wed, 06/25/2008 - 04:50
User Badges:

The Aironet 1130AG cannot do this.

You will have to use a separate program like the ones mentioned before to do this.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode