How to configure AIR-WLC4402-50-K9 in cluster

Unanswered Question
Jun 24th, 2008

Hi dear,

Could you please give me some clues how to configure AIR-WLC4402-50-K9 in cluster.

Thanks in advance

Best Regards

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Tue, 06/24/2008 - 17:21

Explain what you are trying to acomplish. Do you mean like in a server environment behind load-balancers?

mferhai Tue, 06/24/2008 - 23:45

Hi,

I mean, i want to use the first controller as a primary and the second controller as a secondary..If the primary goes down, the secondary take the role.

Thanks

Scott Fella Wed, 06/25/2008 - 03:39

Basically you configure the ap's to point to the primary, secondary and or tertiary controller. What you can do also is put half of your ap's on one wlc and the other half on the second wlc. Then configure the secondary wlc as the other wlc. You must make sure you also configure the mobility groups which is required.

This doc might help:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00809817ca.shtml

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode