HWIC-AP-AG-A issues in C1841

Unanswered Question
Jun 24th, 2008
User Badges:

C1841 256 / 64


12.4(11)XJ or 12.4(11)XW8


Wireless HWIC reports "no valid power levels found"...


Doco says it's a supported module in 1841, but hw configurator does not list it as an option.


If I manually set OFDM power level to max, and force channel scan the intf comes up momentarily but then goes back into err/reset state.


Also, following appears in log.


%ALIGN-3-TRACE: -Traceback= 0x607B7AF8 0x607A6AB4 0x607A8298 0x607A8354 0x6072B058 0x60735CE4 0x60736084 0x0

*Jun 24 21:26:55.475: %ALIGN-3-TRACE: -Traceback= 0x607BE24C 0x607B7958 0x607B7F84 0x607A6AB4 0x607A8298 0x607A8354 0x6072B058 0x607



Module does not do this in 2811 chassis running same code revision.



I am trying a newer X revision of 12.4(11)XW8 to see if it resolves.


Feature set is AdvSecK9



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
leciscokid Tue, 06/24/2008 - 19:54
User Badges:

Update.


12.4(11)XW8 seems to resolve the issue with the card going into err-disable, and not finding power.


I will post an update after a few days of running.



Thanks,


BD

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode