Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
224
Views
5
Helpful
1
Replies

CUCME 4.0 and Video

Tobivan_Helden_2
Level 1
Level 1

‎06-25-2008 01:24 AM - edited ‎03-13-2019 05:24 PM

Dear all,

1. I want to organize SCCP 2 SCCP video call between to IP Phones:

- CUCME 4.0(0)

- IP Phone 7941 SCCP-based (load file is SCCP41.8-3-3S)

- IP Phone 7961 SCCP-based (load file is SCCP41.8-3-3S)

- All are living in the same subnet

2. I've configured:

- 'video' under each ephone (enables IP Phone video support)

- 'video > maximum bit-rate 256' under telephony-service mode

- 'service phone videoCapability 1' under telephony-service mode

- said 'create cnf-files', resetted the phones

3. 'show ephone registered'

ephone-3 Mac:0017.E041.ABCD TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 12 and Server in ver 5

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8

IP:A.B.C.D 52840 7941 keepalive 0 max_line 2

button 1: dn 3 number 511 CH1 IDLE CH2 IDLE

Username: AAA Password: BBB

Do my phones can video ?

Labels:
0 Helpful
1 Reply 1

gpulos
Level 8
Level 8

‎06-25-2008 04:45 AM

Your phones cannot do video without the proper VTA pieces set as well as your 7941/61s configured to do video.

You've got the 7941/61 video configuration so now all you need is to setup some VTA hardware/software at the users workstations.

Please see the following link for VTA config on CME:

http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_configuration_example09186a0080725c15.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents