cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
675
Views
0
Helpful
1
Replies

Basic configuration for a WLAN Controller - 4400

jeremyault
Level 1
Level 1

I've been reading over the "Cisco Wireless LAN Controller Configuration Guide, Release 4.0".

So it looks like once you have the HTTPS enabled and the management IP set, the majority of the configuration is through the GUI - clicking your way through all the settings.

I've never used a wireless LAN controller -- so to make this quick and easy, is it possible to make a "quick and dirty cut and paste" CLI template to get it up and running with just minimal settings left to be done?

If so, could you post it? Thanks.

1 Reply 1

Scott Fella
Hall of Fame
Hall of Fame

Well, first you will have to console into the wlc and go through the startup wizard. that is your minimum configuration to get it working. No way around this unless you build a script to automatically enter information on the startup wizard.

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: