tomek0001 Thu, 06/26/2008 - 10:01

You might look at using a BVI, bridged virtual interface if you are trying to "connect" routed ports. With a BVI you are adding the routed interfaces to a bridge group as in a Layer 2 bridge back in the old days of the Ethernet.


Check out this link for more help:


http://www.cisco.com/univercd/cc/td/doc/product/l3sw/8540/rel_12_0/wx5_11a/config/7cfg8500.htm




(please rate if you found this useful)

Actions

This Discussion