06-26-2008 04:27 AM - edited 03-15-2019 11:32 AM
dial-peer voice 11 voip
voice-class h323 1
incoming called-number 1#
tech-prefix 1#
dtmf-relay h245-signal
fax-relay ecm disable
fax rate 14400
no vad
Is this dial-peer working- as there is no session target or port1/1 .....
many thanks
06-26-2008 05:02 AM
This is a valid incoming voip DP.
It is not a valid outgoing voip DP.
See what is the difference:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080147524.shtml
Hope this helps, please rate post if it does!
06-26-2008 05:11 AM
Understanding the Operational Status of Dial Peers on Cisco IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010e6d1.shtml
easy way to tell is typing
show dial-peer voice summary
HTH
javalenc
if this helps, please rate
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
