Is WS-X4248-RJ45V supported in 4507R?

Unanswered Question
Jun 26th, 2008
User Badges:

I'm doing a customer build and when i insert the line card i get the following:

Switch#sh mod all


Mod Ports Card Type Model Serial No.

----+-----+--------------------------------------+-----------------+-----------

1 2 1000BaseX (GBIC) Supervisor(active) WS-X4515 J

2 2 1000BaseX (GBIC) Supervisor(standby) WS-X4515 J

5 0 Unsupported module WS-X4248-RJ45V J


M MAC addresses Hw Fw Sw Status

--+--------------------------------+---+------------+----------------+---------

1 001b.2a90.e300 to 001b.2a90.e301 2.0 12.1(12r)EW 12.1(13)EW1, EAR Ok

2 001b.2a90.e302 to 001b.2a90.e303 5.0 12.2(20r)EW1 12.2(25)EWA5, Ok

5 001b.5341.1810 to 001b.5341.183f 3.3 Other


I thought that these linecards were supported on this Chassis number. Can anybody help or does anybody have a solution? (sorry to rush, but it's reasonably urgent)

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
n.nandrekar Thu, 06/26/2008 - 05:16
User Badges:
  • Silver, 250 points or more

hi!

Hardware wise , it seems to be supported. You will have to check if the ios version you are running supports it. Can you tell what IOS version are you running?


You can use the following link to findout the min supported release for your hardware config:

http://tools.cisco.com/Support/Fusion/FusionHCHome.do?mySession=6124872&myStep=2


Regards,

Niranjan


(pls rate helpful posts)

Ibbywannit Thu, 06/26/2008 - 05:21
User Badges:

I'm not sure which IOS i will need. Here's a copy of the output:


Switch#sh vers

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IK2S-M), Version 12.1(13)EW1, EARLY DEPLOYMENT RE

LEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Tue 18-Mar-03 07:52 by hqluong

Image text-base: 0x00000000, data-base: 0x00F6AFAC


ROM: 12.1(12r)EW

Dagobah Revision 71, Swamp Revision 28


Switch uptime is 24 minutes

System returned to ROM by power-on

System image file is "bootflash:cat4000-ik2s-mz.121-13.EW1.bin"



This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to

[email protected].


cisco WS-C4507R (XPC8245) processor (revision 7) with 524288K bytes of memory.

Processor board ID FOX110408VQ

Last reset from PowerUp

4 Gigabit Ethernet/IEEE 802.3 interface(s)

403K bytes of non-volatile configuration memory.


Configuration register is 0x2102

Mark Yeates Thu, 06/26/2008 - 05:20
User Badges:
  • Gold, 750 points or more

This line card requires a minimum of

"12.2(18)EW" IOS to be supported.


Mark

Ibbywannit Thu, 06/26/2008 - 05:25
User Badges:

"And there we see the problem..."


Damn - OK, thanks for your help there Mark.

Actions

This Discussion