Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1650
Views
0
Helpful
6
Replies

Association of DSPFARM

Juan Carlos Arias Perez
Level 4
Level 4

‎06-26-2008 09:27 AM - edited ‎03-15-2019 11:33 AM

I configured successfully meet-me service on CCME 4.1, but I have a doubt on the correct association of the profile for transcoding cause the status is ASSOCIATION IN PROGRESS, what could be missing??

2821#sh dspfarm all

Dspfarm Profile Configuration

Profile ID = 2, Service = TRANSCODING, Resource ID = 2

Profile Description :

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 2

Number of Resource Available : 2

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Codec : g711alaw, Maximum Packetization Period : 30

Codec : g729ar8, Maximum Packetization Period : 60

Codec : g729abr8, Maximum Packetization Period : 60

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1

Profile Description :

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 2

Number of Resource Available : 2

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 1 9.4.5 UP N/A FREE xcode 2 - - -

0 5 9.4.5 UP N/A FREE xcode 2 - - -

0 6 1.1.137 UP N/A FREE conf 1 - - -

0 9 1.1.137 UP 1 USED conf 1 7798 32071 12709

0 9 1.1.137 UP 1 USED conf 1 7804 27321 27311

Total number of DSPFARM DSP channel(s) 4

Thanks for your help.

Regards,

Juan Carlos

Labels:
Preview file
7 KB
0 Helpful
6 Replies 6

Chad Stachowicz
Level 6
Level 6

‎06-26-2008 10:07 AM

Juan,

sccp ccm group 22

bind interface GigabitEthernet0/0.30

associate ccm 7 priority 1

associate profile 1 register confdsp1

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

maximum sessions 2

associate application SCCP

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

I don't see that the transcoding profile has been associate at all!

HTH,

Chad

0 Helpful

Juan Carlos Arias Perez
Level 4
Level 4
In response to Chad Stachowicz

‎06-26-2008 10:31 AM

Hi Chad,

That's exactly my problem and my doubt, could you kindly give your comments on how to associate transcoding profile.

I appreciate for your answer.

Regards,

Juan Carlos

0 Helpful

Juan Carlos Arias Perez
Level 4
Level 4
In response to Chad Stachowicz

‎06-26-2008 10:39 AM

I test it with this command and it's the same:

sccp ccm group 22

associate profile 2 register mtp001de5e1d5f8

Kindly please give me your comments.

Regards,

Juan Carlos

0 Helpful

Chad Stachowicz
Level 6
Level 6
In response to Juan Carlos Arias Perez

‎06-26-2008 10:49 AM

did you add mtp001de5e1d5f8 as a transcoding resource unfer CCM? Check registration status on the CCM and see if it shows registered then..

HTH,

Chad

0 Helpful

Juan Carlos Arias Perez
Level 4
Level 4
In response to Chad Stachowicz

‎06-26-2008 11:01 AM

Well Chad, I just remember you that I'm running CCME, I will refresh my configuration only for the dsp if this could help to see the problem:

!

sccp local GigabitEthernet0/0.30

sccp ccm 172.16.0.1 identifier 7 version 4.1

sccp

!

sccp ccm group 22

bind interface GigabitEthernet0/0.30

associate ccm 7 priority 1

associate profile 2 register mtp001de5e1d5f8

associate profile 1 register confdsp1

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

maximum sessions 2

associate application SCCP

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

!

telephony-service

sdspfarm conference mute-on 845 mute-off 845

sdspfarm units 2

sdspfarm transcode sessions 2

sdspfarm tag 1 mtp0014f2018ad0

sdspfarm tag 2 confdsp1

conference hardware

!

Regards,

Juan Carlos

0 Helpful

Juan Carlos Arias Perez
Level 4
Level 4
In response to Juan Carlos Arias Perez

‎06-26-2008 11:14 AM

Chad, now I got it and both are associated, I had the ID tag interchanged on SCCP group and telephony-service, on this last post I realized that.

Thanks anyway for your time.

Regards,

Juan Carlos

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents