06-26-2008 09:52 AM - edited 03-15-2019 11:33 AM
Is there a way to build system speed dials in Call Manager 6.1?
I have a site that is wanting to have about 200 - 300 system speed dial numbers. Is this possible to do?
I could do this with translation patterns but did not know if there was something similar to setting up personal speed dials.
I do not want per phone basis, this needs to be something specific to this cluster.
Solved! Go to Solution.
06-26-2008 10:19 AM
You can use either transaltion patterns (no canned way to bulk insert TPs unless you develop something in AXL), or use cti ports with dummy DNs (i.e. #XXX where XXX is the speed dial number) and set the call forward all to the desired destination, you can bulk insert cti ports.
HTH, please rate all posts!
Chris
06-26-2008 10:19 AM
You can use either transaltion patterns (no canned way to bulk insert TPs unless you develop something in AXL), or use cti ports with dummy DNs (i.e. #XXX where XXX is the speed dial number) and set the call forward all to the desired destination, you can bulk insert cti ports.
HTH, please rate all posts!
Chris
06-26-2008 10:28 AM
This is what I was afraid of...
dang it...maybe in version 7
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide