debug translation

dphills18 · ‎06-26-2008

Can someone give me any insight as to what may be causing calls not to go through. I posted a snippet of a debug. Thanks.

=======================================

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallCanGateway:

CALL_ERROR_INFORMATIONAL; Gateway Is Not Allowed;

Incoming InterfaceType=1, Outgoing Interface Type=28, Call Id=0x4B

*Jun 26 17:18:23.515: //-1/xxxxxxxxxxxx/CCAPI/cc_update_feature_vsa:

*Jun 26 17:18:23.515: : updating existing feature vsa

*Jun 26 17:18:23.515: //-1/xxxxxxxxxxxx/CCAPI/cc_update_feature_vsa:

*Jun 26 17:18:23.515: feature call basic

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Start Calling Accounting;

Call Entry(Incoming=TRUE)

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Cause Value=3, Call Entry(Disconnect Cause=0)

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3)

Chad Stachowicz · ‎06-26-2008

I need the entire debug voip ccapi inout and the whole config. also if its a pri debug isdn q931

Thanks!

Chad

Jaime Valencia · ‎06-26-2008

that cause is

No route to destination

it's all i can tell from your post

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate