Chad Stachowicz Thu, 06/26/2008 - 12:51
User Badges:
  • Silver, 250 points or more

Meet-me numbers are for the whole CM Cluster as long as something can call the number / pt pattern.


Just assign the correct softkeys to the 7936... hit meet me dial the number and wall!



HTH, please rate helpful posts!


Chad

Rob Huffman Thu, 06/26/2008 - 12:55
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi James,


Just to add a little to the good info from Chad (+5 points for your recent participation here Chad);


Here is some additional info;


Conference Bridge Configuration


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecf8a.html


Adding a Meet-Me Number/Pattern


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecf96.html#76011


Hope this helps!

Rob


Chad Stachowicz Thu, 06/26/2008 - 12:59
User Badges:
  • Silver, 250 points or more

Thank you, I am getting a little addicted, and its keeping me fresh while studying for my next Voice Lab attempt! Glad to be here!



Chad

Actions

This Discussion