spanning-tree 3500 XL Switch

Answered Question
Jun 26th, 2008
User Badges:
  • Bronze, 100 points or more

I have an old 3500 XL switch I want to install on my network temporarily for some users. The IOS support only ibm and ieee spanning tree. I configured the interfaces into a vlan and enable portfast on them and changed my spanning-tree priority for the vlan to 65535 (so it doesn't attempt to become the root). On the network, the other access switches (3750's) are running PVST. Is there anything I still need to change to be on the safe side. Oh! i also deleted the vlan database and made it a transperate switch with the defualt domain and I made sure all the ports are access ports.

Correct Answer by glen.grant about 8 years 11 months ago

Should be ok with what you did already.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (1 ratings)
Loading.
Correct Answer
glen.grant Thu, 06/26/2008 - 16:58
User Badges:
  • Purple, 4500 points or more

Should be ok with what you did already.

Actions

This Discussion